2in1 YY-1031 PH/Temp

2023/7/17 12:17:41
  • Brand Water Testing
  • Model 2in1 YY-1031 PH/Temp
Introduction

Smart Bluetooth Skin PH Meter Paper Cloth Leather PH Tester Aquarium SPA Pool Water Quality Monitor Micro Solution Test

¡¾Upgraded Smart Bluetooth PH Tester¡¿£ºThe new super version of the PH tester adds wireless connectivity. The pH tester connects to your phone or tablet in seconds and you can get all your readings in one view. It makes testing more accurate and convenient. Note: Please read the user manual for specific operations, if there is any abnormality, please contact customer service.

¡¾Easy Operation¡¿£ºImmersed the electrode of the tester in water and waited for a few seconds to get the data on the LCD screen. No need to match colors one by one like test strips. The operation is simpler and more convenient. Support mobile APP one-button backlight control, easy to read even in dim light.

¡¾One-key data storage and sharing¡¿£ºOne-key storage of all measurement data, intelligent control of mobile APP, real-time viewing, long-term recording of measurement and calibration data, easy comparison and analysis, data synchronization, automatic/manual storage; export Exce/print-share, Remarks can be added to display the location, and the measurement value, time, date, remarks, location, etc. can be viewed. Make testing work more efficient and fun.

¡¾High-precision replaceable Flat Electrode, wide application range¡¿: The flat electrode is mainly used to measure flat samples. Flat sample test such as skin,paper, cloth and leather, micro solution test, routine aqueous solution test, suitable for swimming pools And spa, koi fish pond, also suitable for aquarium, sea water, marine/salt water fish tank PH test.

¡¾Multi-function¡¿£ºMeasurement data lock, ¡ãF&¡ãC temperature unit conversion, automatic temperature compensation, IP67 waterproof function, data synchronization, setting measurement upper limit (maximum and minimum value), 2 groups of PH calibration (6.86/ 4.00 / 9.18 or 7.00 / 4.00 / 10.01)

Notice:

1. When testing the skin: there should be no sweat or dirt on the skin surface, but it should not be excessively cleaned (before testing, please do not use cleansing products) to avoid affecting the measurement results. Moisten the skin slightly with distilled water, press the flat electrode slightly on the skinand read after the measurement result is stable. When testing paper, cloth or leather: add 1-2 drops of distilled water to slightly wetand then test it directly.
2. The product APP will be updated from time to time. If your phone fails to connect wirelessly or fails to store data during use, you need to uninstall the current APP and download the latest version to reinstall.


Specification
item
value
Type
pH Meter
Customized support
OEM
Place of Origin
China
Guangdong
Brand Name
BIRASCAN
Model Number
YY-1031
Product name
Bluetooth pH Tester
Batteries ‏
4 LR44 batteries required. (included)
Measuring range
0.00~14.00pH
Temperature compensation
0.1¡æ - 60.0¡æ
Bluetooth
Bluetooth 5.2 version
Application
Skin ,Fruit, Skin care products
Product Description

pH Meter with Bluetooth:pH meter is suitable for testing the pH of surface samples with high precision, such as skin, fruit, dough, skin care products, etc, and also suitable for routine pH tests of an aqueous solution. 


Automatic Calibration pH Tester:With high sensitive flat pH sensor, you can get a full measurement range of 0-14pH, 0.01 pH resolution. Compared with other pH meters, the pH is a 3-point calibration method, and our pH is a 5-point calibration method and equipped with a calibration powder (Asia Standard: pH 4.00, pH 6.86, pH 9.18, and EU Standard: pH 7.00, pH10.01), 0.1~60 ¡æ automatic temperature compensation, your PH testing device will automatically identify the calibration solutions to give you your reading in a snap. Comprehensive Information Display:Simply immerse the pH meter electrode in the solution to be tested, and readings are quickly displayed on a large LCD display. multi-parameter display at the same time, mobile phone APP control backlight display. 


Cloud-Based Data Management System:Accurate real-time Bluetooth data transmission and clear measured values make it easy for you to save, manage and share test data without worrying about data loss. 


Easy to Use:Digital pH meter with fully customizable parameter settings. the App can set the upper and lower limits of pH, which can be set according to your needs. when the value you set exceeds the test range, the App interface will display a red value abnormally, notifying you of any values exceeding your preset range.


How to Calibrate the PH Meter?

Ever so easy to calibrate
1. Two calibration modes: 6.86/4.00/9.18 and 7.00/10.01 can be chosen to dissolve the chosen powders in different cups with 250ml
distilled water: then stir until the powder has completely dissolved.
2. Put the electrode into 6.86 solutions, wait for the value to stabilize, press "CAL" for 5 seconds and the screen will display
"CAL". release the button and wait for 6.86 to flash 3 times to complete 6.86 calibrations.
3. Repeat the above steps if you need to calibrate pH 4.00 or pH 9.18.

   

Specifications :

1.Moder: YY-1030
2.PH Range: 0.00-14.00 p§ß
3.PH Resolution: 0.01pH
4.PH Accuracy: ¡À0.1pH
5.TEMP Range: 0.1C-60.0¡ãC, 32.1¡ãF-140.0¡ãF
6.TEMP Resolution: 0.1¡ãC; 0.1¡ãF
7.TEMP Accuracy: ¡À0.5¡ãC
8. PH Calibration: 6.86/ 4.00 / 9.18 or 7.00 / 4.00 / 10.01 (Optional two sets of calibration modes) Calibration records can be viewed
9. Electrod Replaceable: Puncture electrode (3.3M KCL Electrode Storage Solution)
10.Temp. ATC: 0.1¡ãC-60.0¡ãC
11.Environment: 0.1¡ãC-80¡ãC; RH: max 90%
12.Waterproof: IP67
13.Battery: 4*1.5V (LR44) not included; low battery indicator
14.Bluetooth: Mobile bluetooth 5.2 Version
15.Backlights: With backlights, support mobile control
16.Data: Save as Excel sheet/Support printing
17.Data storage: Can store the latest 1000 records of data
18.Standby time: Around 50 days (turn on bluetooth) 2 years (turn off bluetooth)
19.Packing list: 1*Bluetooth PH tester; 5 packs of PH calibration powder (4.0, 6.86, 9.18, 7.0, 10.01); 1*English manual

    

Data synchronization display :

The PH meter data will be synchronized to the APP, which can display multiple data at the same time, which is convenient and fast

Mobile APP intelligent control :

Real-time viewing, long-term data recording, easy comparison and analysis

Automatic and manual storage/data can be exported to Excel for viewing and sharing :

The automatic saving time can be set, and the automatic saving time interval can be set to 30-9999 seconds.

 

You can set the maximum or minimum value of the measurement by yourself :

Set the maximum or minimum pH limit according to the user's requirements. If the test result is out of range, the value will be displayed in red.

OPERATION :

APP downtoad :

(IOS)(Android)"IOS system: Open the APP store that comes with your iPhone, search for YINMIK and download it; or scan the QR code with Google Chrome to download the App.

*Android system: Scan the QR code with Google Chrome to download the APP."

Notes:

1. When the meter is connected to the APP, it needs to locate the mobile phone to connect successfully.
2. The APP is updated frequently. After the update, the old version may nat be connected or used. Just uninstall the old APP and download the new version connect the meter to the new version of the APP again.

Bluetooth Connection :

1.Press the "ON/OFF" button for 3-5 seconds to turn on the Bluetooth of the meter.After the Bluetooth is turned on, the screen will display the Bluetooth icon
2.Turn on the mobile phone location function, otherwise the connection will fail.
3.Turn on the Bluetooth of the mobile phone andsearch for the model of the meter click connect when the model of the meter appears.
4.Open the "YINMIK" APP, the APP will automatically match the model of the meter.When the APP page displays the meter model, indicating that the meter is successfully connected to the APP.

Questions and Answers

Q : Doubts after receiving the product?

A : Factory calibrated for immediate use. When done, rinse the electrodes with purified water. Gently insert a few times to make sure there are no air bubbles around the electrodes. Do not disassemble the instrument without authorization to avoid damage to the instrument. It is normal to generate resistance when the probe encounters 6 during the break. Be careful not to bump or bump the electrode bulb, otherwise it will rupture. A jump of air and value. If the electrode is damaged, the electrode needs to be replaced.

F : Is it possible to calibrate 5 packs of calibration powder (4.0, 6.86, 9.18, 7.0, 10.01) at one time?

A : No, the calibration of the product should be carried out in 2 groups, link the APP of the product, and switch the calibration mode of the product. Calibration mode A can only calibrate 4.0, 6.86 and 9.18; calibration mode B can only calibrate 4.0, 7.0, and 10.01

 

More Products