PH-010 PH/Temp/Hygrometer
- Brand Water Testing
- Model
PH-010 PH/Temp/Hygrometer
Portable pH Meter PH-010 LCD Digital pH TEMP Meter Aquarium Water Quality Acidity Folding Tester Measurement Testing Tools
Description:
Designed and unique, and uses a folding structure, easy to carry.
The electrode is replaceable, and the same host can be reused.
Can adjust many angles to measure the measured liquid, easyto use.
LCD screen display, providing you clear display to watch, easy to read
Suitable for aquarium, aquaculture, fish hatchery, food processing, laboratory, paper industry, swimming pools, etc.
Specification:
Color: grey.
Material: ABS.
Size: Approx. 188x35x35mm.
Measure range:
pH: 0.00~14.00
Temp: -5¡æ~ 50¡æ
Resolution:
pH: 0.01
Temp: 0.1¡æ
Accuracy:
pH: ¡À0.1
Temp: ¡À1¡æ
Calibration: Manual 1 point.
Temperature Compensation: 0¡æ ~50¡æ.
Battery: 4x1.5V AG-13(included).
There might be a slight error due to different hand measurement.
Package included:
1x PH-010 PH meter.
1x User manual.
Operation
1. Open the electrode(automate turn-on the power supply).Remove the protective cap. 2. First rinse the electrode with distilled water, and suck it withfilter paper. 3. Immerse the PH meter electrode in the solution to be tested.Stir gently and wait about one minute. Read display value. 4. After use, rinse the electrode with water to minimize contamination. Replace the protective cap. Fur the electrode(automate shut-off the power supply).
where can be used£¿
packing list
FAQ
Note:
1.During operating, place the meter in the measured environment must more than five minute. Please don't plug up the venthole on the back of the meter. Otherwise, it will affect on the veracity of environmental temperature and humidity. 2.Because if the product with battery, the customs will not pass, so the product not include the battery, hope you can understand, thank you.
PH Calibration
1. Immerse the electrode in PH 6.86(under the temperature of 25¡æ)standard buffer solution of phosphate, and turn it gently. 2. Regulate the trimmer"STAND"with a screwdriver until buffer solution value corresponding to the measurement temperature is obtained. (This instrument have automatic temperature compensation, compensation to 25¡æ). 3. After cleaning and wiping the electrode, Immerse the electrode in PH4. 00 or PH9. 18 buffer solution. After about two minutes until the buffer solution value corresponding to the measurement temperature is
Multiple Colors Available
